A Guide to Selecting The Right Automatic Transfer Switch

 Automatic Transfer Switch helps transfer the load from utility power to backup or secondary power source when the power is gone. Multiple factors and requirements determine various types of Automatic Transfer Switch available.

There are several types of modes in which these ATS work-

  •  Open-transition transfer devices- These switches work by opening the connected source before connecting to the new  one. 

  • Fast-closed-transition transfer- These switches work parallelly; one source is disconnected when the two are working.

  • Soft closed transition- they synchronize the sources while they transfer the live sources and connect them with the help of a ramp load impulse to the backup power source.

  • Sub-cycle transfer- the transfer of power from one source to another often happens within a minimal time difference, causing a slight interruption.

 

 

Apart from the types of ATS, there are several factors you should keep in mind while selecting a perfect ATS.

  • Continuous Current Rating- an efficient automatic transfer switch supplies maximum current for three to four hours.

  • Types of load: based on your requirement, it is necessary to choose the type of load an ATS will handle. There are various system loads: Total system load, restrictive loads motor, incandescent lamp, and electric discharge lamp loads

  • Voltage rating: the automatic transfer switch should be able to handle increased voltage stress. AC system voltage ratings are 120, 208, 240, 480, 600 volts, and the standard frequency is 50 to 60 Hz.

  • Choose the right supplier: always choose a reliable source of your supplies. Netrack is a transfer switch manufacturer, providing you a range of rack accessories, including an automatic transfer switch. You can choose according to your need.


There are the following types of switches to choose from-

  • Standard switches: they are ATS installed with their sub-panel. People don’t prefer using these switches now as they are completely outdated now.

  • Load Centers: the ATS and sub-panel are in the same circuit. These switches are meant for small houses whose voltage usage is not that high.

  • Service Disconnect: these switches are suited for large generators. They are the most costly among the three but most effective and capable.

 

With all these points in your head, you can easily choose Automatic Transfer Switch to choose among the many choices you have. It is always better to take advice from an expert. NetRack is an automatic transfer switch manufacturer and one destination for your IT enclosures and related queries. Visit the following website for further information-

https://www.netrackindia.com/

Comments

Post a Comment

Popular posts from this blog

NRSS Series – Seismic racks for continuity and reliability

Image
    IT room or hub room of an organization plays a crucial role in ensuring that the company functions flawlessly and without facing system or equipment outages. It is a basic need for every organization that its server and related telecommunication equipment always stay connected and operational, even when threatened by any natural force. The same is true to ensure business continuity in case of natural disasters. Criticality of IT racks Setting up a server or network room with the right equipment and cabling can be time-consuming and expensive. A single IT rack can support the entire gamut of systems that serve as the backbone for the company. Hence, IT cabinets are chosen considering all the aspects such as physical threat, vibration due to seismic waves, or unavoidable force.  Seismic-proof server racks  are the perfect solution to improve the durability and performance of the equipment and feasibility in the overall maintenance. Carefully designed Seismic Rack Earthquake is a matt
Read more

An ultimate guide to cable management solution

As the days pass by we can see a lot of changes in businesses today and the reason behind this is the modernization and increased dependency on machinery. When we talk about machinery we think of those black wires tangled and creepy, which creates an uneasiness to work in that atmosphere. The scariest part is if the wires have cuts and circuits which tend to be explosive and harmful for humans. Undoubtedly this problem needs a solution! Cable management is something that many companies are dealing with until we find a solution to the actual wireless world what we all dream about.   As we know, most of the network issues and hassles are created by poor cable management. In contrast, the “After” cabling with good Network Cable management is easy to maintain and makes it convenient to work amidst the wire bounded world. It also ensures 100% efficiency and focuses of the employees working in the organisation. This explains how important it is for us to fix this problem. There
Read more

Coloured PDU - Power Distribution Unit case study

Image
Client’s concern Our telecommunication industry consists of complex networks, telephones, and internet connected PCs . We ensured to incorporate enhanced infrastructure to organize them optimally. The PDUs provide power supply to different systems connected to the network. It has helped in power protection and cable management. However, there was an issue which hampered our work progress . As the PDUs were identical, it was difficult to recognize faulty and redundant cables . The technicians had to spend hours identifying the issue. This increased downtime and outage costs.  The Need: We required an optimum solution which could manage energy and helped in easy identification of faulty cables. Netrack’s solution: We approached Netrack, a leading manufacturer of enhanced networking rack products for servers and data centers. As they deal with different industries of similar requirement, they quickly provided an excellent solution which resolved our i
Read more